Motorcycle Tools

FMF - Exhaust Wash Plug:
Protect the inside of your expensive exhaust system with an FMF Exhaust wash plug. Keeps water and debris out as you wash or store your bike.

Motion Pro - Micro Bleeder (Showa and Kayaba Forks)
Having properly functioning suspension is one of the most important parts of motocross racing and can either make or break lap times. Fork setup makes a huge difference on the track, or in the desert and setting up your suspension to...

Pro Taper - Tie Downs
• Velcro Secured strap end.
• Spring loaded carabiner safety hook.
• Swivel-hook carabiners.
• Extra Wide 1.5" straps

PC Racing  - Fork Support:
Features: Sized to fit 80cc up to the big bores
Stabilizes bike during transportation
Keeps bike strapped down tight without damaging fork seals
Bikes won’t bounce off tiedowns, preventing damage to motorcycles or vehicle
Fits all bikes with 11 inches or more of travel
Polycarbonate...

Motion Pro - Armor Rim Strip Tape
Bringing you absolute protection, Motion Pro Armor Rim Strip Tape adheres to the inside of your rim and keeps your tube completely safe regardless of how many tire changes you perform. • Ultra tough and durable material protects tubes
• Won't shift or...

Motion Pro - Micro Bleeder (WP Forks)
• For 2007 or later SX/SXF/XC/XCF/XCW models with WP 4860 MXMA CC Closed Cartridge fork caps (P/N 4860.0516S1). And for use on all 1999 and later WP 43/WP 48 fork caps (P//N's 4860.0074S and 4860.0075S) with external spring preload adjustment. These fork caps...

Motion Pro - Folding Sag Scale 2
Folds up for easy storage
Makes setting sag on todays MX bikes a snap
 

 Motion Pro - Rim Shield II :
New and improved version of original Rim Shield
Now made with genuine DuPont Zytel Super Tough nylon resin for unmatched strength and durability
Prevents rim damage from tire levers during tire changes
Dual raised beads facilitate inserting tire lever under tire bead and prevents...

Motion Pro Chain Breaker
* Chromoly frame, heat-treated steel tip & spindle * Pushes pin completely through chain link * Folds to fit a small tool compartment * Fits all 420-630 chain * May be used with impact wrench for shop use
TOOL PC005001 $25.99
REPLACEMENT PIN...

The Grunge Brush:
The Grunge Brush enables you to clean your chain with ease. The three side bristles allow you to clean all four sides of your chain and the long bristle side lets you clean other parts of your bike like sprockets and wheels. Regular component cleaning prevents premature...

Motion Pro - Ringer Fork Seal Driver
Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers
Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use
No more worrying about part of the tool falling...

Motion Pro - Single Shock Nut Spanner
• Heat-treated alloy steel
• Designed for shop use

Motion Pro Drive T-Handles #PC008158 
Use any 1.4" drive attachments such as sockets, hex drive, crow's foot or swivels Lifetime replacement warranty.
1/4" (8.5" long)

Motion Pro - Fork Cap Remover Wrench
49mm, 8 point box wrench for removing the fork cap (cartridge) on dual camber closed cartridge forks on late model Yamaha's and Honda's (2010 Honda CRF250R uses 57-8236 Fork cap wrench).
50mm, 6 point box wrench for removing the fork cap (cartridge) on...

Motion Pro - Micro Bleeder (WP Forks - No Ext. Preload)
• For use on all 1999 and later WP 43/WP 48 fork caps (P/N's 4860.0020S and 4860.0020S1) without external spring preload adjustment. These fork caps DO NOT require a pin spanner to remove the fork cap
• New ultra-compact,...

 Motion Pro - Motospade:
Made of durable ABS plastic
Ergonomic handle
Two ended design for ultimate versatility
Curved spade for the big stuff
Brush head for cleaning radiator and controls with tip for foot pegs and hard to reach areas
Hanging hole for easy storage in the garage
Patented design
...

Pro Circuit - Exhaust Plug:
An essential item when washing your dirt bike, the Pro Circuit Exhaust Plug helps to prevent water and mud from leaking into your exhaust system. Water getting inside your exhaust system and onto your packing could cause damage to the entire system. Not only great...

MOTOCROSS BOLT PACK
Japanese Pro Pack-
• Ideal for the serious racer / mechanic
• Over 170 piece of factory style hardware
• Kit comes in durable, divided organizer
• Not for CRF's
Japanese Track Pack II-
• Best selling and most popular fastener kit in the industry
• 54...

Motion Pro Hooked Spring Puller
• Used to remove exhaust pipe springs, Seat or Tank holding springs, Cotter pins, side stand springs and other parts.
• Made in the USA.

Motion Pro - Combo Axle Wrench-Tire Tool 3/8 Breaker Bar
• Select your Wrench Size (Single Wrench)
• Add the adaptor to convert your wrench into a breaker bar 
• **Adapters Sold Separately** 
• Made from 7075 T-6 Aluminum
• Lightweight, perfect for any fanny pack
• 3/8 drive adapter...

BikeMaster - Tire Valve Puller w/ Loop Handle
Simply thread the puller through the valve hole in the rim, screw the cap onto the valve stem of the inner tube, seat the tube inside the tire and once the second tire bead is in place, pull the valve stem into...

BikeMaster - Measuring Cup With Lid
• Because it’s so important, make sure it’s right every time
• Forget the old style, move up to the latest design
• Made from the toughest materials for longer life and thicker than most competitors
• Includes a lid to keep the...

 Motion Pro - Y-Drive Combo Wrench:
Innovative dual-use design combines 6 tools into one
8 mm, 10 mm and 12 mm hex socket
4 mm, 5 mm and 6mm hex drive
Padded Y-shape for excellent grip and leverage
Compact design is ideal for trail tool packs
Chrome-Vanadium tool steel
Limited...

 Motion Pro - Shock Spanner Punch:
Ideal tool for turning hard to reach lock ring and preload ring on rear shocks
Angled brass tip gives secure bite and protects ring from damage
Non replaceable brass tip can be filed down to remove galling
Heavy duty construction
Long shaft to reach...

Motion Pro - PBR Chain Tool
• Innovative design will Press, Break & Rivet 520, 525, & 530 chains with one convenient tool
• Versatile design will remove chain pins, press master-link plates and rivet hollow nose & soft nose (quad stake) master link pins on O-ring and non O-ring...

Motion Pro - Fork Cap Tool
Showa Fork Cap (50mm)::
• For removing the fork cap and compression cartridge on twin chamber Showa forks found on late model Honda, Kawasaki, and Suzuki off-road motorcycles
• Outer ring fits 50 mm octagonal fork cap
• Inner body holds cartridge so it...

Motion Pro 11-Slot T-Handle Rack
Easily hangs on the side of most tool boxes
Keeps T-handles ready for action

Matrix - M52 Oil Funnel
THE ULTIMATE STORAGE FUNNEL KEEPS THE DRIPS IN AND THE DIRT OUT
• Caps eliminate spills and contaminants.
• Flex shape makes it easy to get to hard to fill filler opening.
• Made from strong durable chemical resistant polyethylene.
• Reduces debris from contaminating...

FITS 125cc Bikes and UP:
Risk Racing - Lock-N-Load System:

The Lock-N-Load securely holds your motocross bike into your trailer without the use of tie-down straps, floor anchors or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up...

Motion Pro - T6 Combo Lever Set:
• Tire spoon with axle nut hex wrench and tire spoon hex wrench for rim lock nut set
• Both levers have perfectly contoured tire lever on one end
• One lever has unique combination stepped 12/13mm box end wrench on other end...

BikeMaster - Steel Tire Iron With Handle
• Specially designed for every day use with comfortable handle
• Handle has high grip surface for confident leverage
• Super smooth chrome end eases beads on and off
• Smooth rounded edges avoids rim marring and tube pinching
• Tempered steel...

BikeMaster - Oil Dispenser & Drain Pan
• If you change your own oil, these are perfectly designed for you
• Chemically resistant with enough capacity for most machines
 

Nothing is better than a good T- handle set. That's why Motion Pro's Vanadium Steel 8 piece set has six point deep sockets and a sturdy and handy poly storage bag. It's the perfect gift for any mechanic in your shop or house. Sizes include: 8, 10, 12, 13, 14,...

Motion Pro - Hydraulic Brake Bleeder
New Brake Bleeder will aid in the bleeding and servicing of hydraulic brakes
Makes bleeding brakes a one man job
The unique check valve allows fluid and air to escape while preventing air from re-entering the system

 Motion Pro - Gear Jammer:
Locks gears in place for easy installation and removal
Allows tightening lock nuts to proper torque setting
Works on virtually any motor
Powerful magnet holds tool in place during use
Billet 6061 T-6 aluminum construction
Blue anodized finish with laser engraved Motion Pro logo
Originally...

Motion Pro - Ergo Spoke Wrenches (Individual)
• Unique combination wrench design has 3-sided open end and semi-closed end
• Use open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples that require more torque
• Specially designed ergonomic handle allows larger turning...

BikeMaster - Spoke Wrench
• Made of steel
Fits 6 different sizes: 1, 2, 3, 4, 5 and 6mm
Manufacturer’s lifetime warranty

Motion Pro - BeadPro Tire Bead Breaker
• Innovative multi-use tire tool set
• Breaks the bead on most street and off road motorcycle tires
• Integrated tire spoons for tire removal and installation
• Light weight and compact size is perfect for tool packs
• Ergonomic handles with crossguard...

BikeMaster - Tire Valve Puller with Aluminum Handle:
Simply thread the puller through the valve hole in the rim, screw the cap onto the valve stem of the inner tube, seat the tube inside the tire and once the second tire bead is in place, pull the valve stem into...

Motion Pro - Professional Tire Pressure Gauge
• Pressure range of 0-15 or 0-30 psi is ideal for checking off-road mortorcycle tires.
• High-quality liquid filled 2.5" dial guage with protective rubber boot.
• Accurae to plus/minus 1.5% of maximum guage reading.
• Blue anodized 6061 T-6 body with pressure-relief...

BikeMaster - 3 Piece Tire Iron Set
• Designed to be a superior product
I-beam cross section for strength and bend resistance
Forged chrome vanadium steel (no stamped sheet metal)
Shot peened surface for strength relief
Nickel plated for corrosion resistance
Rounded edges to avoid tube pinching, tire damage
...

BikeMaster - 8-Inch Tire Irons 2 Pack
• Everyone knows just one tire iron won’t do it
• 2 tire iron pack with equal length
• Forged steel for light weight and super strength
• Not bent sheet metal like other brands
• Ergonomic design, rounded...

Risk Racing - Holeshot Race Gate
Improve your reaction time and learn to control power out of the gate and into the first corner.  This innovative product allows riders to independently practice their starts.  When the rider presses the wireless remote button mounted on their handlebars, it will activate a...

 Motion Pro - Bearing Driver Set:
Fits bearing with 12-25 mm I.D. and 32-47 mm O.D.
Adapters can be changed quickly to accommodate a wide range of bearing combinations
Durable steel handle and anodized aluminum drivers
Can be used with a hammer or shop press
Laser etched adapters for easy...

MX 450 Tool Pack:
Prepare for anything when you wear the OGIO MX 450 Tool Pack on your next ride. Whether you're off-roading on your ATV or hitting the trail on your dirt bike, this tool pack ensures you're ready for any unexpected mishaps.
Tool Pack Features::
• Deluxe...

BikeMaster - Tire Iron Spoon
• Made of heat treated vanadium steel
• Overall length 10-1/4”
• Manufacturer’s lifetime warranty

Motion Pro - Spinner II T-Handle:
• Available in 1/4" and 3/8" for versatility
• Bearing mounted spinner for faster removal and installation of bolts & nuts
• Chrome vanadium handle and shaft with durable chrome finish
• Blue anodized spinner with laser engraved Motion Pro logo
• 1/4" Shaft...

BikeMaster - Mini Ratchet Wrench Set
• 17-piece kit fits just about anywhere and packed full of essential bits
• Quality ratchet and bits made from tool steel
• Comes with 5 cross head, 3 flat head, 2 torx head, 5 sockets and extension
• All of the most...