Extras

Motion Pro - Micro Bleeder (Showa and Kayaba Forks)
Having properly functioning suspension is one of the most important parts of motocross racing and can either make or break lap times. Fork setup makes a huge difference on the track, or in the desert and setting up your suspension to...

PC Racing  - Fork Support:
Features: Sized to fit 80cc up to the big bores
Stabilizes bike during transportation
Keeps bike strapped down tight without damaging fork seals
Bikes won’t bounce off tiedowns, preventing damage to motorcycles or vehicle
Fits all bikes with 11 inches or more of travel
Polycarbonate...

Motion Pro - Micro Bleeder (WP Forks)
• For 2007 or later SX/SXF/XC/XCF/XCW models with WP 4860 MXMA CC Closed Cartridge fork caps (P/N 4860.0516S1). And for use on all 1999 and later WP 43/WP 48 fork caps (P//N's 4860.0074S and 4860.0075S) with external spring preload adjustment. These fork caps...

 Motion Pro - Rim Shield II :
New and improved version of original Rim Shield
Now made with genuine DuPont Zytel Super Tough nylon resin for unmatched strength and durability
Prevents rim damage from tire levers during tire changes
Dual raised beads facilitate inserting tire lever under tire bead and prevents...

Motion Pro Chain Breaker
* Chromoly frame, heat-treated steel tip & spindle * Pushes pin completely through chain link * Folds to fit a small tool compartment * Fits all 420-630 chain * May be used with impact wrench for shop use
TOOL PC005001 $25.99
REPLACEMENT PIN...

Motion Pro - Ringer Fork Seal Driver
Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers
Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use
No more worrying about part of the tool falling...

Motion Pro - Single Shock Nut Spanner
• Heat-treated alloy steel
• Designed for shop use

Motion Pro Drive T-Handles #PC008158 
Use any 1.4" drive attachments such as sockets, hex drive, crow's foot or swivels Lifetime replacement warranty.
1/4" (8.5" long)

Motion Pro - Fork Cap Remover Wrench
49mm, 8 point box wrench for removing the fork cap (cartridge) on dual camber closed cartridge forks on late model Yamaha's and Honda's (2010 Honda CRF250R uses 57-8236 Fork cap wrench).
50mm, 6 point box wrench for removing the fork cap (cartridge) on...

Motion Pro - Micro Bleeder (WP Forks - No Ext. Preload)
• For use on all 1999 and later WP 43/WP 48 fork caps (P/N's 4860.0020S and 4860.0020S1) without external spring preload adjustment. These fork caps DO NOT require a pin spanner to remove the fork cap
• New ultra-compact,...

Motion Pro Hooked Spring Puller
• Used to remove exhaust pipe springs, Seat or Tank holding springs, Cotter pins, side stand springs and other parts.
• Made in the USA.

Motion Pro - Combo Axle Wrench-Tire Tool 3/8 Breaker Bar
• Select your Wrench Size (Single Wrench)
• Add the adaptor to convert your wrench into a breaker bar 
• **Adapters Sold Separately** 
• Made from 7075 T-6 Aluminum
• Lightweight, perfect for any fanny pack
• 3/8 drive adapter...

BikeMaster - Measuring Cup With Lid
• Because it’s so important, make sure it’s right every time
• Forget the old style, move up to the latest design
• Made from the toughest materials for longer life and thicker than most competitors
• Includes a lid to keep the...

 Motion Pro - Y-Drive Combo Wrench:
Innovative dual-use design combines 6 tools into one
8 mm, 10 mm and 12 mm hex socket
4 mm, 5 mm and 6mm hex drive
Padded Y-shape for excellent grip and leverage
Compact design is ideal for trail tool packs
Chrome-Vanadium tool steel
Limited...

 Motion Pro - Shock Spanner Punch:
Ideal tool for turning hard to reach lock ring and preload ring on rear shocks
Angled brass tip gives secure bite and protects ring from damage
Non replaceable brass tip can be filed down to remove galling
Heavy duty construction
Long shaft to reach...

Motion Pro - PBR Chain Tool
• Innovative design will Press, Break & Rivet 520, 525, & 530 chains with one convenient tool
• Versatile design will remove chain pins, press master-link plates and rivet hollow nose & soft nose (quad stake) master link pins on O-ring and non O-ring...

Motion Pro - Fork Cap Tool
Showa Fork Cap (50mm)::
• For removing the fork cap and compression cartridge on twin chamber Showa forks found on late model Honda, Kawasaki, and Suzuki off-road motorcycles
• Outer ring fits 50 mm octagonal fork cap
• Inner body holds cartridge so it...

Motion Pro 11-Slot T-Handle Rack
Easily hangs on the side of most tool boxes
Keeps T-handles ready for action

Motion Pro - T6 Combo Lever Set:
• Tire spoon with axle nut hex wrench and tire spoon hex wrench for rim lock nut set
• Both levers have perfectly contoured tire lever on one end
• One lever has unique combination stepped 12/13mm box end wrench on other end...

BikeMaster - Oil Dispenser & Drain Pan
• If you change your own oil, these are perfectly designed for you
• Chemically resistant with enough capacity for most machines
 

Nothing is better than a good T- handle set. That's why Motion Pro's Vanadium Steel 8 piece set has six point deep sockets and a sturdy and handy poly storage bag. It's the perfect gift for any mechanic in your shop or house. Sizes include: 8, 10, 12, 13, 14,...

Motion Pro - Hydraulic Brake Bleeder
New Brake Bleeder will aid in the bleeding and servicing of hydraulic brakes
Makes bleeding brakes a one man job
The unique check valve allows fluid and air to escape while preventing air from re-entering the system

Factory Effex - 2012 Tire Pens
• Give your bike that factory one-off racing look with the permanent Tire Logo Marker.
• Easy to use and long lasting ink specially formulated to adhere to tire rubber.
• Available in Red, Silver, White and Yellow.

 Motion Pro - Gear Jammer:
Locks gears in place for easy installation and removal
Allows tightening lock nuts to proper torque setting
Works on virtually any motor
Powerful magnet holds tool in place during use
Billet 6061 T-6 aluminum construction
Blue anodized finish with laser engraved Motion Pro logo
Originally...

Motion Pro - Ergo Spoke Wrenches (Individual)
• Unique combination wrench design has 3-sided open end and semi-closed end
• Use open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples that require more torque
• Specially designed ergonomic handle allows larger turning...

BikeMaster - Spoke Wrench
• Made of steel
Fits 6 different sizes: 1, 2, 3, 4, 5 and 6mm
Manufacturer’s lifetime warranty

Motion Pro - BeadPro Tire Bead Breaker
• Innovative multi-use tire tool set
• Breaks the bead on most street and off road motorcycle tires
• Integrated tire spoons for tire removal and installation
• Light weight and compact size is perfect for tool packs
• Ergonomic handles with crossguard...

Motion Pro - Professional Tire Pressure Gauge
• Pressure range of 0-15 or 0-30 psi is ideal for checking off-road mortorcycle tires.
• High-quality liquid filled 2.5" dial guage with protective rubber boot.
• Accurae to plus/minus 1.5% of maximum guage reading.
• Blue anodized 6061 T-6 body with pressure-relief...

 Motion Pro - Bearing Driver Set:
Fits bearing with 12-25 mm I.D. and 32-47 mm O.D.
Adapters can be changed quickly to accommodate a wide range of bearing combinations
Durable steel handle and anodized aluminum drivers
Can be used with a hammer or shop press
Laser etched adapters for easy...

Motion Pro - Spinner II T-Handle:
• Available in 1/4" and 3/8" for versatility
• Bearing mounted spinner for faster removal and installation of bolts & nuts
• Chrome vanadium handle and shaft with durable chrome finish
• Blue anodized spinner with laser engraved Motion Pro logo
• 1/4" Shaft...

BikeMaster - Mini Ratchet Wrench Set
• 17-piece kit fits just about anywhere and packed full of essential bits
• Quality ratchet and bits made from tool steel
• Comes with 5 cross head, 3 flat head, 2 torx head, 5 sockets and extension
• All of the most...

Motion Pro - Spoke Wrench
Features unique square end openings which grip the spoke nipple on all four sides instead of just two, assuring that the nipple corners are not rounded off during tightening
With many nipples being made from aluminum or brass, this square tool is important
Sizes are...

 Motion Pro - Steering Stem Bearing Tool:
Removes and installs tapered roller bearing at base of steering stem
Fits most motorcycles with tapered roller bearing at base of steering stem
Includes 26 mm, 28 mm, 30-31 mm, 35-36 mm race protectors for installing bearing race
Blue anodized bearing protectors are...

BikeMaster - 1/4 inch T-Handle Wrench With Sockets & Swivel
• Heat-treated chrome vanadium steel
• Chrome-plated for durability and long life
• Black chrome coating for a great look and an easy find in the tool box
• T-handle has ball bearing detent socket holders on each leg
...

Motion Pro - Snap Ring Pliers
• Economical pliers that easily work with both inside and outside opening snap rings or clips
• Includes 3 extra sets of tips, 1 additional straight tip and 2 offset angled tips

EXCEL - Spoke Torque Wrench Set
• Accurately build and maintain your wheels
• Allows you to increase or decrease torque on spokes
• Lightweight chrome, aluminum body, calibrated to + or - 2 percent accuracy
• 6pc. set includes chrome aluminum bodied wrench, 1 chrome plated Pro Series 6pt....

 Motion Pro - Steering Head Bearing Race Driver:
Fits tapered steering bearings 41-42 mm, 47-48 mm, 51-52 mm and 55-56 mm
Innovative double sided drivers
Safely installs the tapered bearing race in the frame
Made of durable 6061-T6 anodized aluminum
Ergonomic handle
Laser etched for easy identification

Motion Pro - T-6 Float Bowl Wrench
Designed to remove 17mm float bowl drain plugs
Made from light-weight 6061 T-6
Compact design to carry in tool pack
12 point hex and low profile design for tight access

 Motion Pro - Axis Truing Balance Stand:
Precision built tool for building, truing, and balancing wheels
Innovative single sided design allows easy access to spokes and nipples
High quality bearings allow precise wheel balancing
15 mm axle fits most modern street and dirt bikes and many mini bikes
Hub cones...

BikeMaster - 17-Piece Tool Kit
Designed specifically for metric vehicles
Great for bikes that have a poor or no tool kit with them
Don’t get caught on the road tool-less, this could save you a long walk
Open ended wrenches: 11, 12, 13, 14, 16 and 17mm sizes
10mm...

BikeMaster - 3-Piece 230mm Brush Set
• Brass, nylon and stainless steel brushes
• Plastic handles
• Manufacturer’s lifetime warranty
 

BikeMaster - Parts Washer
• Lightweight, corrosion proof, insulated, safe, cleaner and better than the sink; more environmentally friendly and save money in solvent
• A better way to clean your parts in a light, portable, safe way
• UL and SAA Certified
• Comes with filter installed,...

BikeMaster - Multi Function Pocket Tool (10 Functions)
• Aluminum body for lighter weight
• Anodized for corrosion protection and great looks
• Compact size packs multi function utility
• Equipped with 2, 2.5, 3, 4, 5, and 6mm hex wrenches plus an 8mm hex tip, cross head and...

 Motion Pro - Showa 50mm Fork Cap Tool:
For removing the fork cap and compression cartridge on twin chamber Showa forks found on late model Honda, Kawasaki, and Suzuki off-road motorcycles
Outer ring fits 50 mm octagonal fork cap
Inner body holds cartridge so it can be removed from fork...

Bike Master - Stretch Net
• 13" x 13" multi-hook cargo net
• Metal hooks with rubber tip

BikeMaster - Magnetic Spark Plug Socket Set
• Forget the rubber O-Ring style plug sockets which get oily and worn out
• These magnetic sets will make removing or installing plugs in modern twin cam engines a breeze
• Won’t wear out over time like the O-Ring type and...

BikeMaster - Tap & Die Wrench Set
• 40-piece set
• Extremely accurate threading
• Should be used to chase threads before assembly and repairs
• Made from high quality tool steels
• Complete with taps, dies and wrenches
• Metric

BikeMaster - Spoke Wrench Set (10 Piece
• Make sure your wheels are strong and true
Super accurate wrench ends make spoke adjustment a snap
Made from chrome vanadium tool steel for long life
Chrome plated for corrosion resistance
Size range covers from mini bikes to full bore race...