Support

Troy Lee Designs - BP7850-HW Short Sleeve Protective Shirt
Durable, abrasion-resistant panels
Open armpit design
Wide neck opening for comfort
Anatomical design with integrated protection zones
CE EN 14120-2003+A1-2007 tested for abrasion resistance

EVS - SB02 Shoulder Support
• Designed to help rotator cuff and dislocated shoulders.
• Fits Both Left and Right shoulder
• Made from vented neoprene "Airprene".
• No restriction on range of motion.
• Pulls arm into rotator cuff.
• Same brace worn by...

Titan Race Short:
The Titan Race Shorts offer lightweight hip, thigh, and tailbone protection without the bulk of body armor. The multi-panel, ergonomic construction contours to the body for a precise fit. Built-in stretch allows the shorts to move with you without binding for improved mobility. And the anatomically shaped...

EVS - SB03 Shoulder Brace
EVS' innovative shoulder support system adding the X-Strap Technology for superior stabilization & compression
• Provides increased level of support & compression
• Fully adjustable to fine tune support to your needs
• Breathable air mesh construction with TPR gripper pull-tabs
• X-Strap system
...

Thor - Comp Deflector
• Molded biofoam chest panel to block roost
• Ride-lite moisture wicking chassis
• Mesh chassis to promote airflow and ventilation
• Form fitting fitment to prevent bunching
• CE approved

EVS - SB04 Shoulder Brace:
Have you recently injured your shoulder and are experience pain that limits your mobility? Look into purchasing the EVS – SB04 Shoulder Brace that is specifically designed to maximize impact protection and support for your shoulder. The goals EVS had when designing this shoulder brace...

Alpinestars - Bionic Freeride Shorts
Features: Technical under pants designed to offer maximum protection, and extreme flexibility and comfort
Lycra® and mesh base construction
Ventilated, Bio-foam padding on hip, thigh and tailbone area for provides comfort and high impact protection
Hard PU inserts reinforce the thigh and tailbone areas for...

Leatt - Roost Tee:
The Leatt Roost Tee is a new upper protection that offers a non-chaffing fit that is very lightweight. The Tee was left long intentionally to be easily tucked into your pants and don’t ride up.
 
All sides of the Roost Tee, the front, rear,...

Troy Lee Designs - 3900 Ultra Protective Vest:
• Lightweight vest protection
• Dense bio-foam protection of the spine and other key areas of the back
• Wide neck opening for comfort
• Anatomical design with integrated protection zones
• Neck Brace compatible

Alpinestars - MX Cooling Vest
• The evaporative MX cooling vest is designed to cool the wearer during outdoor sporting activities in hot weather conditions
• This is achieved through the garments water management system, which uses an exclusive polymer embedded material that has been specifically designed to absorb and...

 Risk Racing - Palm Protector:

Motocross and trail riders are all too familiar with blisters. They can tear up the hands of even the strongest riders. Blisters can make holding onto your handlebars a painful and sometimes dangerous experience due to loss of grip. They can single handedly take...

Asterisk - Zero G Knee Brace Pant
After much research and seeing a rising need for this type of product, we decided to design something functionally better in a knee brace product for athletes. Previously, available products consisted of knee brace sleeves and one-piece sock/sleeve combinations. Each of these offers...

 Leatt - Shoulder Brace:
Years of the same commitment, passion and dedication went into the development of the revolutionary Leatt-Brace® and continues with every new product being developed at Leatt®. Backed by scientific research and the collaboration with highly esteemed players in the safety field, all their products benefit from...

100% - Zephyr Cooling Tank:
Get the most out of our workout with the 100% Zephyr Cooling tank. Made from a blend of Polypropylene/Elastane for the ideal cooling formula, the Zephyr is the ideal for any workout. The quick, moisture wicking properties pull moisture away from the skin, keeping you...

Leatt - DBX 5.0 Airflex Impact Short

EVS - TUG Short Sleeve Shirt:
Up your endurance level with the EVS TUG (Technical Under Gear) Short Sleeve base layer! Designed to provide active compression to the torso muscles, this piece of gear helps to decrease lactic acid buildup, providing greater endurance and stamina. A 4-way stretch moisture-wicking fabric ensures...

Fly Racing - Mid Layer Pants:
Features::
• Moisture wicking, antistatic, single brushed fabric construction
• Four-directional stretch polyester and spandex fleece
• Flat lock stitching for maximum comfort
• YKK back pocket zipper
• Two front hand pockets
• Elastic waist with belt loops
• YKK main zipper with...

Fly Racing - Mid Layer Jacket:
Features::
Moisture wicking, antistatic, single brushed
Four-directional stretch polyester and spandex fleece
Ventilated underarm and side mesh panels
YKK® main reversed zipper
YKK® hidden zipper hand pockets
Elastic cuffs with thumb holes

Alpinestars - Tech Top Short Sleeve Summer:
These ultra-lightweight base layers offer moisture-wicking and cooling comfort while their flatlock seams and a tubular construction provide a compression fit and unrestricted movement on a bike. Features::
• Ultra-lightweight, technical base layer anatomically optimized to be worn under outer garments.
• Comfortable moisture-wicking...

Seven MX - Zero Compression Jersey:

     The new Seven MX Zero Compression jersey is a new highly innovative motocross jersey that is designed to be worn under your jersey and allow riders to perform at their highest levels. The innovative features are designed specifically to promote blood...

Leatt - Body Protector 6.5:
"The hard shell 6.5 Body protector is a new product and concept for 2021, it comes in 2 pieces, there is a zip up compression suit with built in shoulder and elbow impact protectors and also a height adjustable kidney belt. Then a full hardshell...

EVS Brace Sleeves:
EVS has created a new level of undergarments for motocross riders. The EVS Brace sleeve is designed specifically for wearing under your knee brace to improve comfort. This EVS brace sleeve helps to mitigate abrasions, bruising, chaffing, and other soreness that may occur while riding with knee...

EVS - TUG 3/4 Pant:
Ride at your best with the EVS TUG (Technical Under Gear) 3/4 Pant. A Motocross-specific base layer, the TUG Impact pant provide performance benefits such as cooling, moisture wicking, impact protection, and integrates within the functionality of racewear. Designed with fewer seams, a low profile chamois...

EVS - TUG Sleeveless:
Up your endurance level with the EVS TUG (Technical Under Gear) Sleeveless base layer! Designed to provide active compression to the torso muscles, this piece of gear helps to decrease lactic acid build up (that burning feeling in your muscles) providing greater endurance and stamina. A 4...

 
Leatt - C-Frame Knee Brace Sleeves
Made to work with Leatt C-Frame Knee Braces the Knee Brace Sleeves use MoistureCool wicking fabric that helps keep you cool during the ride.
Years of the same commitment, passion and dedication went into the development of the revolutionary Leatt-Brace® and continues with...

 Leatt - Back Protector 3DF:
The 3DF Back Protector from Leatt is made from 3DF Airfit soft impact foam. It is flexible and conforms to the body but instantly hardens when subjected to a hard impact. This back protector has been CE certified and tested and it scores 6 points...

Alpinestars - Roost Base Layer Top:
Protective knitted, breathable/stretchable base layer. Feautures strategically placed padded zones on the shoulder, bicep and chest areas to provide additional protection against roost and debris, while still allowing high levels of rider movement.Top Features::
• Breathable knitted construction provides comfortable tight fit while being stretchable...

EVS - TUG Moto Boxer:
Add some breathability to your riding gear with the EVS TUG (Technical Under Gear) Boxer. This lightweight, form fitting breathable compression short is perfect for any riding situation. An impact foam tailbone pad is included, and is removable. This generation of TUG gear has been...

EVS - TUG Vented Short:
Add some breathability to your riding gear with the EVS TUG (Technical Under Gear) Vented Short. This lightweight, form fitting breathable compression short is perfect for any riding situation. An impact foam tailbone pad is included, and is removable. This generation of TUG gear has been...

EVS - TUG Padded Short:
Add an extra layer of protection and comfort to your gear set with the EVS TUG (Technical Under Gear) Padded Short! Adds a layer of defense against roost in the hip and thigh area thanks to EVA molded impact pads. EVS has designed the latest generation...

EVS - TUG Impact Short:
Add an extra layer of protection with the EVS TUG Impact Short. A compression short designed to give maximum impact protection. EVA hip, thigh, and tailbone pads comes standard and are removable. Molded hip plates are added for increased protection for any riding situation. Short Features::
•...

 Leatt - Fusion 3.0 Vest Chest Protector with Neck Brace
Another innovation from Leatt, the first combination neck and torso protector for Adult riders. The Fusion vest 3.0 CE certified neck and CE certified body protection addresses the fact that riders are very susceptible to chest, flank, shoulder, back and...

Leatt - 3DF AirFit Lite Body Protector
Dr. Leatt filed his first neck-brace related patent in 2003 and went on to found the Leatt Corporation in 2007. In less than a decade, Leatt has become one of the leaders in the body armor and protective gear industry. Leatt manufactures some...

Leatt - 3DF 3.0 Impact Shorts:
Great value for money 3DF hip impact shorts with the same comfort features as our top models. These shorts offer hip and thigh protection and score a total of 9 points in the Leatt protection rating system Compression MoistureCool material with flatlock stitching and mesh...

AI-1 AIRBAG VEST
The Ai-1 Airbag Vest and In&Box DPP (Detect-Protect-Perfect) platform is the first continually evolving motorcycle protection technology driven by artificial intelligence. The In&Box detection module offers unprecedented crash sensitivity through continuous algorithm updates. The Ai-1 vest is comfortable and low-profile for use with any riding jacket, and...

Fox Racing - Tecbase Compression Shorts:
Compression shorts for everyday workouts
Designed to provide a compression fit for better performance and faster recovery, the Tecbase Compression Shorts feature a lightweight, four-way stretch for ultimate moveability and flat-lock seams for all-day comfort. Constructed using moisture-wicking fabric, they'll move sweat away from...

Fox Racing - Tecbase Compression Tights:
• Slim fit, 4-way stretch
• Moisture wicking to keep you dry, cool, and comfortable
• Compression fabric provides muscle support
• Mesh paneling on legs and back yoke for added breathability
Description:
Compression tights for everyday workouts
Designed to provide a compression fit...

Fox Racing - Tecbase Fire Tights:
Tights that keep you warm as you workout
The Tecbase Fire Tights keeps you warm on and off the bike. They're made from an ultrasoft, flexible material that provides all-day comfort. With a close-to-the-body fit, they're an ideal layering piece under motocross or mountain...

Fox Racing - Tecbase Fire Long Sleeve Shirt:
Warmup with the thermal base layer shirt
The Tecbase Fire Long Sleeve Tee keeps you warm on and off the bike. It's made from an ultrasoft, flexible material that provides all-day comfort. With a close-to-the-body fit, it's an ideal layering piece under...

Fox Racing - Tecbase Short Sleeve Shirt:
Warmup with the thermal base layer shirt
The Tecbase Fire Long Sleeve Tee keeps you warm on and off the bike. It's made from an ultrasoft, flexible material that provides all-day comfort. With a close-to-the-body fit, it's an ideal layering piece under motocross...

Fox Racing - Tecbase Long Sleeve Shirt:
Key Features:
• Slim fit, 4-way stretch
• Ultrasoft material for all-day comfort
• Moisture wicking to keep you dry, cool, and comfortable
Description:
An essential slim-fit, long sleeve base layer
The Tecbase Long Sleeve Tee brings an ultrasoft and comfortable feel to...

Seven MX - Fusion Roost Guard Vest:
Fusing body with protection. A protective supra-dermal layer conserves energy and fuses lightweight shielding to the body.
Sleeveless performance mesh construction pulls moisture away from the body. // Molded independent impact cells provide roost protection. // Designed to be worn under the jersey.

Alpinestars - Bionic Pro Protection Shorts:
The CE and UKCA certified Level 1 Bionic Pro Protection Shorts boast a lightweight, highly flexible design which provides impact and high abrasion protection within a breathable mesh sleeve for excellent levels of airflow and comfort. These shorts are equipped with built-in CE and...

Alpinestars - Bionic Action Protection Shorts:
The CE and UKCA certified Level 1 Bionic Action Protection Shorts boast a lightweight, highly flexible design which provides impact and high abrasion protection within a breathable mesh sleeve for excellent levels of airflow and comfort. These shorts are equipped with built-in CE and...

Fox Racing - Defend Neck Gaiter:
Features:  Lightweight, breathable material actively regulates heat to keep you warm and dry
Designed to stay up during rough downhill and out of the way when you need to breathe hard during a climb
85% Polyester / 15% Elastane