Motion Pro Tools

Motion Pro - Micro Bleeder (Showa and Kayaba Forks)
Having properly functioning suspension is one of the most important parts of motocross racing and can either make or break lap times. Fork setup makes a huge difference on the track, or in the desert and setting up your suspension to...

Motion Pro - Micro Bleeder (WP Forks)
• For 2007 or later SX/SXF/XC/XCF/XCW models with WP 4860 MXMA CC Closed Cartridge fork caps (P/N 4860.0516S1). And for use on all 1999 and later WP 43/WP 48 fork caps (P//N's 4860.0074S and 4860.0075S) with external spring preload adjustment. These fork caps...

Motion Pro - Folding Sag Scale 2
Folds up for easy storage
Makes setting sag on todays MX bikes a snap
 

 Motion Pro - Rim Shield II :
New and improved version of original Rim Shield
Now made with genuine DuPont Zytel Super Tough nylon resin for unmatched strength and durability
Prevents rim damage from tire levers during tire changes
Dual raised beads facilitate inserting tire lever under tire bead and prevents...

Motion Pro Chain Breaker
* Chromoly frame, heat-treated steel tip & spindle * Pushes pin completely through chain link * Folds to fit a small tool compartment * Fits all 420-630 chain * May be used with impact wrench for shop use
TOOL PC005001 $25.99
REPLACEMENT PIN...

Motion Pro - Ringer Fork Seal Driver
Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers
Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use
No more worrying about part of the tool falling...

Motion Pro - Single Shock Nut Spanner
• Heat-treated alloy steel
• Designed for shop use

Motion Pro Drive T-Handles #PC008158 
Use any 1.4" drive attachments such as sockets, hex drive, crow's foot or swivels Lifetime replacement warranty.
1/4" (8.5" long)

Motion Pro - Fork Cap Remover Wrench
49mm, 8 point box wrench for removing the fork cap (cartridge) on dual camber closed cartridge forks on late model Yamaha's and Honda's (2010 Honda CRF250R uses 57-8236 Fork cap wrench).
50mm, 6 point box wrench for removing the fork cap (cartridge) on...

Motion Pro - Micro Bleeder (WP Forks - No Ext. Preload)
• For use on all 1999 and later WP 43/WP 48 fork caps (P/N's 4860.0020S and 4860.0020S1) without external spring preload adjustment. These fork caps DO NOT require a pin spanner to remove the fork cap
• New ultra-compact,...

 Motion Pro - Motospade:
Made of durable ABS plastic
Ergonomic handle
Two ended design for ultimate versatility
Curved spade for the big stuff
Brush head for cleaning radiator and controls with tip for foot pegs and hard to reach areas
Hanging hole for easy storage in the garage
Patented design
...

Motion Pro Hooked Spring Puller
• Used to remove exhaust pipe springs, Seat or Tank holding springs, Cotter pins, side stand springs and other parts.
• Made in the USA.

Motion Pro - Combo Axle Wrench-Tire Tool 3/8 Breaker Bar
• Select your Wrench Size (Single Wrench)
• Add the adaptor to convert your wrench into a breaker bar 
• **Adapters Sold Separately** 
• Made from 7075 T-6 Aluminum
• Lightweight, perfect for any fanny pack
• 3/8 drive adapter...

 Motion Pro - Y-Drive Combo Wrench:
Innovative dual-use design combines 6 tools into one
8 mm, 10 mm and 12 mm hex socket
4 mm, 5 mm and 6mm hex drive
Padded Y-shape for excellent grip and leverage
Compact design is ideal for trail tool packs
Chrome-Vanadium tool steel
Limited...

 Motion Pro - Shock Spanner Punch:
Ideal tool for turning hard to reach lock ring and preload ring on rear shocks
Angled brass tip gives secure bite and protects ring from damage
Non replaceable brass tip can be filed down to remove galling
Heavy duty construction
Long shaft to reach...

Motion Pro - PBR Chain Tool
• Innovative design will Press, Break & Rivet 520, 525, & 530 chains with one convenient tool
• Versatile design will remove chain pins, press master-link plates and rivet hollow nose & soft nose (quad stake) master link pins on O-ring and non O-ring...

Motion Pro - Fork Cap Tool
Showa Fork Cap (50mm)::
• For removing the fork cap and compression cartridge on twin chamber Showa forks found on late model Honda, Kawasaki, and Suzuki off-road motorcycles
• Outer ring fits 50 mm octagonal fork cap
• Inner body holds cartridge so it...

Motion Pro 11-Slot T-Handle Rack
Easily hangs on the side of most tool boxes
Keeps T-handles ready for action

Motion Pro - Cable Luber V3:
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals is to offer tools...

Motion Pro - T6 Combo Lever Set:
• Tire spoon with axle nut hex wrench and tire spoon hex wrench for rim lock nut set
• Both levers have perfectly contoured tire lever on one end
• One lever has unique combination stepped 12/13mm box end wrench on other end...

Nothing is better than a good T- handle set. That's why Motion Pro's Vanadium Steel 8 piece set has six point deep sockets and a sturdy and handy poly storage bag. It's the perfect gift for any mechanic in your shop or house. Sizes include: 8, 10, 12, 13, 14,...

Motion Pro - Hydraulic Brake Bleeder
New Brake Bleeder will aid in the bleeding and servicing of hydraulic brakes
Makes bleeding brakes a one man job
The unique check valve allows fluid and air to escape while preventing air from re-entering the system

 Motion Pro - Gear Jammer:
Locks gears in place for easy installation and removal
Allows tightening lock nuts to proper torque setting
Works on virtually any motor
Powerful magnet holds tool in place during use
Billet 6061 T-6 aluminum construction
Blue anodized finish with laser engraved Motion Pro logo
Originally...

Motion Pro - Ergo Spoke Wrenches (Individual)
• Unique combination wrench design has 3-sided open end and semi-closed end
• Use open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples that require more torque
• Specially designed ergonomic handle allows larger turning...

Motion Pro - BeadPro Tire Bead Breaker
• Innovative multi-use tire tool set
• Breaks the bead on most street and off road motorcycle tires
• Integrated tire spoons for tire removal and installation
• Light weight and compact size is perfect for tool packs
• Ergonomic handles with crossguard...

Motion Pro - Sprocket Jammer:
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals is to offer tools of...

 Motion Pro - Bearing Driver Set:
Fits bearing with 12-25 mm I.D. and 32-47 mm O.D.
Adapters can be changed quickly to accommodate a wide range of bearing combinations
Durable steel handle and anodized aluminum drivers
Can be used with a hammer or shop press
Laser etched adapters for easy...

Motion Pro - Spinner II T-Handle:
• Available in 1/4" and 3/8" for versatility
• Bearing mounted spinner for faster removal and installation of bolts & nuts
• Chrome vanadium handle and shaft with durable chrome finish
• Blue anodized spinner with laser engraved Motion Pro logo
• 1/4" Shaft...

Motion Pro - Spoke Wrench
Features unique square end openings which grip the spoke nipple on all four sides instead of just two, assuring that the nipple corners are not rounded off during tightening
With many nipples being made from aluminum or brass, this square tool is important
Sizes are...

 Motion Pro - Steering Stem Bearing Tool:
Removes and installs tapered roller bearing at base of steering stem
Fits most motorcycles with tapered roller bearing at base of steering stem
Includes 26 mm, 28 mm, 30-31 mm, 35-36 mm race protectors for installing bearing race
Blue anodized bearing protectors are...

Motion Pro - Snap Ring Pliers
• Economical pliers that easily work with both inside and outside opening snap rings or clips
• Includes 3 extra sets of tips, 1 additional straight tip and 2 offset angled tips

 Motion Pro - Steering Head Bearing Race Driver:
Fits tapered steering bearings 41-42 mm, 47-48 mm, 51-52 mm and 55-56 mm
Innovative double sided drivers
Safely installs the tapered bearing race in the frame
Made of durable 6061-T6 anodized aluminum
Ergonomic handle
Laser etched for easy identification

Motion Pro - T-6 Float Bowl Wrench
Designed to remove 17mm float bowl drain plugs
Made from light-weight 6061 T-6
Compact design to carry in tool pack
12 point hex and low profile design for tight access

Motion Pro - Crank Shaft Puller:
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals is to offer tools...

 Motion Pro - Axis Truing Balance Stand:
Precision built tool for building, truing, and balancing wheels
Innovative single sided design allows easy access to spokes and nipples
High quality bearings allow precise wheel balancing
15 mm axle fits most modern street and dirt bikes and many mini bikes
Hub cones...

Motion Pro - T-6 Valve Spring Compressor:
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals is to offer...

 Motion Pro - Showa 50mm Fork Cap Tool:
For removing the fork cap and compression cartridge on twin chamber Showa forks found on late model Honda, Kawasaki, and Suzuki off-road motorcycles
Outer ring fits 50 mm octagonal fork cap
Inner body holds cartridge so it can be removed from fork...

Motion Pro - Pivot Suspension Vise:
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals is to offer tools...

Motion Pro - Ergo Spoke Wrench (Set of 6)
• 6 piece spoke wrench set includes convenient storage pouch
• Unique combination wrench design has 3-sided open end and semi-closed end
• Use open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples...

Motion Pro - Euro Metric Hardware Kit:
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals is to offer...

Motion Pro - Valve Stem Seal Install Tool Set:
Four common sizes for use on most modern off-road motorcycles as well as ATVs.
Properly aligns valve stem seal to valve guide so seal snaps on straight every time
Provides for quick and easy installation of valve stem seals on multi...

Motion Pro - 5 in 1 Damper Rod Bleed Tool:
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals...

Motion Pro - Countershaft Seal Puller:
Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstand the harshest conditions. One of their goals is to offer tools...

Motion Pro - Racer Pack 4pc T-Handle Set:
• Set consist of 8mm, 10mm, 12mm and 14mm deep sockets
• Chrome vanadium tool
• Hard nickel-pewter finish
• Manufacturer LIfetime Warranty

Motion Pro - Adjustable Torque Wrench Adapter:
• Torque any fastener with a combination wrench or hex wrench
• Will work with 6mm through 19mm metric and 1/4” through 3/4” fractional SAE combination wrenches
• Will work with 6mm and 8mm Hex wrenches
• Heat-treated steel with...

Motion Pro - Torque Wrench Adapter 12mm/14mm:
• Properly torque two-stroke cylinder base nuts and hard-to-reach fasteners.
• Fits 12 and 14 mm nuts and bolts.
• Extends the reach of any 3/8" drive torque wrench by 3 inches.
• Chrome-vanadium tool steel with hard nickel-pewter finish....

Motion Pro - Metric Multi-Purpose Tool:
 
Features::
• Includes a 1/4" and 3/8" socket driver
• 10mm and 12mm 1/4" drive sockets included
• Tool can be enhanced by adding your own 1/4" or 3/8" drive socket attachments
• Includes convenient carrying case 

Motion Pro - Hex Axle Tool:
Features::
• Recommended for shop or home use
• Heavy-duty heat treated 4130 chromoly construction
• 3/8" square drives on both ends are rated for a maximum of 150 ft. lbs.
• 4 metric hex sizes: 17, 19, 22 and 24mm