Lang Tools

Lang Tools - 40-piece Thread Restorer Kit:
• SAE Rethread files: 9, 10, 11, 12, 13, 14, 16, 18, 20, 24, 27, 28 and 32 threads per inch
• Metric Rethread files: 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00mm per thread.
• Packed in a reusable pouch
• dimensions:...

Lang Tools - 3-Piece Thread Restorer File Set:
• SAE Rethred Files: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 20, 24, 27, 28, and 32 threads per inch
• Metric rethread files: 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 2.50, 3.00mm per thread.
• Packed in a...

Lang Tools - Thread Restorer Kit:
Packaged in a high-impact, strene trap with clear cover for display and storageMetric Kit includes: • 7x Metric rethread dies: M6-1.0, M8-1.25, M10-1.25, M10-1.50, M12-1.25, M12-1.50, M12-1.75
• 7x metric rethread taps: M6-1.00, M8-1.25, M10-1.25, M10-1.50, M12-1.25, M12-1.75
• 1x Metric thread restorer file for...

Lang Tools - Dual Head Air Chuck:
• Designed for use on hard-to-reach wheels.

Lang Tools - Grip Air Chuck:
Sealed ball air chuck is extended 1" from handle to allow access to tight areas
Durable, heavy-duty handle stands up to tough shop abuse
1/4" NPT pipe threaded end will accept an air line quick-disconnect fitting
Dimensions: 10-1/2" x 4" x 1"

Lang Tools - Angled Hose Pinch-Off Pliers:
Pliers designed with a self-locking feature that holds after pressure is applied, simply pull plier handles apart to release. Used to seal vaccume, fuel line and radiator hoses, plus other flexable materials. • Includes small, medium, and large size pliers
• Offset design allows...

Lang Tools - 6 Pc. V-Notch Retaining Ring Pliers:
improved design makes it possible to switch from internal to external, without separating the pliers. • Includes six pliers with four tip sizes.
• Tip Sizes: 0.038, 0.047, 0.070 and 0.090", in a 0, 45, and 90° angles.
:

Lang Tools - 2-Piece Retaining Ring Pliers Set:
Convert between internal and external with a quick flip of a switch. • Each pliers includes a tip kit containing five pairs of durable alloy, color-coded, interchangeable tips and Allen wrench, all stored in a handy pouch.
• Packed in a styrene tray
...

Lang Tools - Cylinder Leakage Tester with Dual Gauges:
Measures the ability of an engine cylinder to hold compressed air. Hooks up to the shop air compressor to supplement for a compression tester. • Includes a precision regulator, M14 standard reach adaptor with 26 in. hose assembly and M14 long reach...

Lang Tools - Valve Spring Compression Tool:
Will reach into small recesses where valve springs and retaining washers are located. Jaws are adjustable in width and have edges so thin they can be foces under and over ends of valve springs to compress it for removal.• Long and slender, maximum opening...

Lang Tools - 12mm Spark Plug ReThreader:
Used to clean-up dirty or damaged spark plug threads. • 5/8 In. Hexagon with O-ring female 3/8 in. square drive
• made in USA

Lang Tools - EZ Grip Plug Gap Gauge:
A handy pocket clip feature keeps this ramp gauge at your fingertips. • Ramp gauge covers all spark plug gapping requirements from 0.020 to 0.080 in.
• Metric gapping scale shown on reverse side
• Specially designed to recess to adjust ground electrodes.
...

Lang Tools - Spark Plug Gap Tool:
Adjusts spark plug gap in graduated ramp sequence.• Sizes: SAE .020-.100, Metric .60-2.40 mm

Lang Tools - 14-Blade Valve Lash Gauge Set:
Used to check valve clearances of small diameter bucket and shim type valve trains.Features::
• 14-Piece set of 4" x 1/4" feeler gauge blades, thickness 0.002 through 0.015 in.
• Stored in bi-fold pocketed pouch with Velcro closure.
• thraight blades can be...